Filter
Top Products
113
Setting menu screens FILM (CAM) MAIN MENU 4 (continued)
EVALUATION screen
The underlining in the variable range column indicates the setting in
the preset mode.
OS/N measurement screen
The S/N measurements are performed on this screen.
Item
Variable
range
Remarks
S/N ON
VF
display
ENG
For setting the S/N
measurement.
DETAIL ON
OFF
ENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFF
ENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFF
ENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFF
ENG For setting the MATRIX to
ON or OFF.
FLARE ON
OFF
ENG For setting the FLARE to
ON or OFF.
M. PED –200
:
+140
:
+200
ENG For adjusting the master
pedestal level.
OModulation measurement screen
The modulation measurements are performed on
this screen.
Item
Variable
range
Remarks
MODULATION ON
VF
display
ENG For setting the modulation
measurement.
DETAIL ON
OFF
ENG For setting the DETAIL to
ON or OFF.
H-F COMPE. ON
OFF
ENG For setting the high-
frequency compensation
to ON or OFF.
GAMMA ON
OFF
ENG For setting the GAMMA to
ON or OFF.
MATRIX ON
OFF
ENG For setting the MATRIX to
ON or OFF.
FLARE ON
OFF
ENG For setting the FLARE to
ON or OFF.
M. PED
(FILM MENU)
(CAM MENU)
–200
:
+000
:
+018
:
+200
ENG For adjusting the master
pedestal level.
OPTION screen
Item
Variable
range
Remarks
EVF SEL MONO
COLOR
VF
display
ENG The EVF terminal video
signal will be switched.
MONO:
Only the Y signal is
output to the EVF
connecter.
COLOR:
The Y, Pb, and Pr
signals are output to the
EVF connecter.
Currently there is no
viewfinder to support
this.
SUPER DTL ON
OFF
ENG For selecting the kind of
detail to be provided.
ON:
A stronger detail than
usual is provided.
OFF:
The same level of detail
as usual is provided.
<Notes>
OWhen the frame frequency setting has been changed, it is
necessary to restart the unit by turning the POWER switch to OFF
and then to ON again for the setting to be switched.
OWhen MONO has been selected as the EVF SEL item setting, the
marker displays are set on the VF MARKER screen of FILM
(CAM) MAIN MENU 2. When COLOR has been selected instead,
they are set using MONITOR MARKER on the VTR MAIN MENU
screen. Furthermore, when COLOR is selected, the EVF ZEBRA
and EVF DETAIL functions no longer work.
OWhen setting SUPER DTL to ON, please adjust the H.DTL
LEVEL, H.DTL FREQ and DTL CLIP values. Also, please adjust
the V.DTL LEVEL according to these values.
OItem will be saved regardless of the ECU DATA SAVE
setting.
E
SYSTEM FREQ. 59.94Hz
60.00Hz
ENG For setting the unit’s frame
frequency.
UF
E
UF
E
UF
E
<Note>
The EVALUATION screen items are returned to their default
settings as soon as the menu is exited.