Filter
Top Products
WRITE
==
USER
ENG
For writing lens files to the
SD memory card.
108
The underlining in the variable range column indicates the setting in
the preset mode.
Setting menu screens FILM (CAM) MAIN MENU 3 (continued)
GENLOCK/IRIS screen
The genlock and iris control settings are performed on
this screen.
Item
Variable
range
Remarks
VF
display
H PHASE
COARSE
00
:
15
USER
ENG
For coarsely adjusting the
H phase during genlock.
H PHASE FINE 00
:
64
USER
ENG
For finely adjusting the H
phase during genlock.
A. IRIS LEVEL 000
:
050
:
100
USER
ENG
For setting the auto iris
target level.
The brightness (iris) is
controlled using this value.
The higher the value
selected, the higher the
brightness.
A. IRIS
PEAK/AVE
000
:
050
:
100
USER
ENG
For setting the ratio
between the auto iris peak
and average value.
The closer the setting is to
0, the greater the
tendency toward average
control; conversely, the
closer the setting is to
100, the greater the
tendency toward peak
control.
A. IRIS MODE NORM1
NORM2
CENTR
USER
ENG
For selecting the auto iris
mode.
NORM1
:
The light is measured for
the entire screen (except
for the edges).
NORM2
:
The light is measured for
the entire screen (except
for the top part).
CENTR
:
The light is measured in
the center area of the
screen only.
S. IRIS LEVEL 000
:
080
:
100
USER
ENG
For setting the super iris
target level.
(Backlight compensation
mode)
IRIS GAIN CAM
LENS
USER
ENG
For setting whether the iris
gain is to be adjusted by
the camera or lens.
IRIS GAIN
VALUE
01
:
06
:
10
USER
ENG
For setting the iris gain
adjustment value.
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
LENS FILE screen
The lens files are stored into the unit’s internal
memory and read from the memory on this screen.
The white shading data and flare adjustment data are
stored together as a lens file.
Item
Variable
range
Remarks
READ
WRITE
==
VF
display
USER
ENG
For reading the lens files.
FILE SELECT
1
:
8
USER
ENG
For selecting the number
of the file to be read or
written.
RESET ALL
==
USER
ENG
For returning all the data
from lens files 1 to 8 to the
factory setting.
TITLE 1: -
TITLE 8:
¢¢¢¢¢¢
¢¢¢¢¢¢
USER
ENG
For enabling titles each
consisting of a maximum
of 12 characters to be set
for the files.
SUFE
==
USER
ENG
For writing the lens files.
Item
Variable
range
Remarks
READ
==
VF
display
USER
ENG
For reading lens files from
the SD memory card.
CARD FILE
SELECT
1
:
8
USER
ENG
For selecting the number of
the file to be read from the
SD memory card or written
on the SD memory card.
TITLE 1: -
TITLE 8:
¢¢¢¢¢¢
¢¢¢¢¢¢
USER
ENG
For enabling titles each
consisting of a maximum
of 12 characters to be set
for the files.
SUFE
LENS FILE (CARD R/W) screen
The contents of the eight lens files recorded in the
internal memory are written on the SD memory card
on this screen. Alternatively, the lens files written on
the SD memory card are read into the internal memory
on this screen.
<Note>
When RESET ALL is executed, the white shading adjustment value
and the flare setting value are reset to the factory default values.