Filter
Top Products
VQT1Q36
52
Advanced (Recording pictures)
∫ Manual exposure
Note
•
The aperture values given in the table above are values when the zoom position is at maximum
Wide.
• Depending on the zoom magnification, some of the aperture values cannot be selected.
[REC] mode: ³±´¿n
Compensating the Exposure
Use this function when you cannot achieve correct exposure due to the difference in brightness
between the subject and the background. Look at the following examples.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by
the aperture value and the shutter speed.
• The exposure compensation value appears on the lower left of the screen.
• The set exposure value is memorized even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
• Exposure can also be compensated by touching the exposure compensation set bar when in
aperture-priority AE or shutter-priority AE.
Available Aperture Value
(Per 1/3 EV)
Available Shutter Speed (Sec)
(Per 1/3 EV)
F2.8 to F3.5 60 to 1/1000
F4.0 to F5.0 60 to 1/1300
F5.6 to F7.1 60 to 1/1600
F8.0 60 to 1/2000
Under exposed Properly exposed Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
Move 3 [È] until [EXPOSURE] appears,
compensate the exposure with 2/1.
• Select [0 EV] to return to the original exposure.
Press [MENU/SET] to finish.
• You can also press the shutter button halfway to finish.
1
2
DMC-FX500P_mst.book 52 ページ ２００８年２月２５日 月曜日 午後５時５４分