Filter
Top Products
93
VQT1Q36
Advanced (Playback)
Press [MENU/SET].
• If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture
size will become smaller as shown below.
• The picture becomes slightly rougher.
Move 3 to select [YES] and then press [MENU/
SET].
• The message [SAVE NEW PICTURES?] appears if the picture
was recorded with a picture size [ ] or less.
Press [‚] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
• You can set up to 50 pictures at one time in [MULTI].
• Depending on the printer being used, some characters may be cut at printing. Check before
printing.
• When text is stamped onto the [ ] pictures, it is difficult to read it.
• Text and dates cannot be stamped on the pictures taken with other equipment.
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be further
reduced in size.)
Aspect ratio setting Picture size
X
// >
Y
// >
W
// >
Q [MULTI RESIZE] Reducing the picture size (number of pixels)
Select [MULTI RESIZE] on the [PLAYBACK] mode
menu. (P21)
Move 3/4 to select the size and then press [MENU/
SET].
• When [DISPLAY] is pressed, an explanation of resizing is
displayed.
Move 3/4/2/1 to select the picture and then press
[DISPLAY].
• Repeat this step for each picture, and press [MENU/SET] to set.
5
6
7
1
2
3
DMC-FX500P_mst.book 93 ページ ２００８年２月２５日 月曜日 午後５時５４分