Filter
Top Products
Advanced (Recording pictures)
46
VQT1C39
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P47 to 52 and “About the
information ” for details about each
scene mode.
1 Press 1 for the [SCENE MODE]
menu.
2 Press 3/4/2/1 to select the
scene mode.
• Press 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
• Press [MENU/SET] and then perform
steps
1, 2 and 3 to change the scene
mode.
∫ About the information
• If you press [DISPLAY] when selecting a
scene mode in step
2, explanations about
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
e.g.: Displaying the information
screen of [BABY1]
• Refer to P41 for information about the
shutter speed.
• The flash setting is memorized even if the
camera is turned off. However, it returns to
the initial setting if the scene mode is
changed. (P39)
• When you take a picture with a scene
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
• If you press 2 when selecting
[PORTRAIT] or [STARRY SKY] in step
2,
the [SCENE MODE] menu [ ] is
displayed. If you then select either the
[REC] menu [ ] or the [SETUP] menu
[ ], you can set the desired items. (P19)
• The following cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [COL.MODE]
SCN
MENU
21
SCN
MENU
SCENE MODE
1
/
2
SCENE MODE
2
/
2
SET
SET
SELECT
SELECT
BABY1
STARRY SKY
DISPLAY
DISPLAY
SET
INFORMATION
MENU
DISPLAY
BABY1
Suitable for taking pictures
of your baby.
Age can be displayed
with pictures if you set
the birthday.
VQT1C39ENG.book 46 ページ ２００６年１２月２１日 木曜日 午前１０時５７分