Filter
Top Products
Advanced (Recording pictures)
65
VQT1C39
Press [ ] to display the [REC] mode
menu and select the item to set. (P59)
∫ About the jitter/movement detection
demonstration screen
Press 1 on the [STABILIZER] screen to
display the jitter/movement detection
demonstration screen. (You cannot take
pictures while the demonstration screen is
displayed.) Press 1 to exit the
demonstration screen.
A: Jitter detection demonstration
B: Movement detection demonstration
• The jitter/movement detection
demonstration screen is an
approximation.
• The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] (P44) and [SPORTS] (P47),
[BABY1]/[BABY2] (P49) and [PET] (P50)
in scene mode only.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• In simple mode [ ], the setting is fixed
to [MODE1] and in [STARRY SKY] (P51)
in scene mode it is fixed to [OFF].
• In motion picture mode [ ], [MODE2]
cannot be set.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
MENU
SET
EXIT
JITTER, SUBJ. MOVE DEMO.
CANNOT BE DISPLAYED
IN REC MODE
VQT1C39ENG.book 65 ページ ２００６年１２月２１日 木曜日 午前１０時５７分