Panasonic DMC-FP2 Digital Camera User Manual


 
12 VQT2M98 VQT2M98 13
The clock is not set when the camera is shipped.
Setting the clock
Open the lens cover
The power is turned on.
If the language select screen is not displayed,
proceed to step
.
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears.
Press [MENU/SET]
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Select the display order for the day, month, and year
([M/D/Y], [D/M/Y], or [Y/M/D]).
Select either [24HRS] or [AM/
PM] for the time display format.
Change
the values
and
settings
• To cancel Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00, and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press .
• Turn on power again and check time display.
(Time and date can be displayed by pressing [DISPLAY] several times.)
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures in digital photo center or when using [TEXT STAMP].
Year can be set between 2000 and 2099.
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
To set local time at travel
destination
[WORLD TIME] (52)
Do not touch the
lens.
Lens cover
To change time setting
Select [CLOCK SET] from [SETUP] menu (17), perform and .
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in camera for the 24 hours
beforehand.