Filter
Top Products
Recording pictures (basic)
42
Taking Pictures using Burst Mode
Preparation
• Set the mode dial except for [ ]/[ ]. (P27)
1 Switch the burst mode setting.
: High speed
;
: Low speed
;
No display (cancelled)
2 Take pictures.
• Keep pressing the shutter button
fully to activate the burst mode.
¬
Suggestions/Tips
¬
ª Number of pictures recorded in
burst mode
• It is possible to record 4 frames in
1 second in burst mode at a shutter
speed higher than 1/60th.
• If the flash is activated, you can record
only 1 frame.
• In Simple mode [ ], the burst speed
is fixed to Low. (P32)
• You cannot take pictures with audio in
the burst mode.
• When setting auto bracket and the
burst mode simultaneously, auto
bracket will be performed.
• Burst mode will not perform as
described if a MultiMediaCard is used
in place of an SD Memory Card. The
reading/writing speed of a
MultiMediaCard is slower than that of
an SD Memory Card.
H
1
600
1
9
1
H
L
Burst
speed
Number of recordable
pictures
4 frames/
second
max.
5 frames
max.
7 frames
(DMC-FX5)/
8 frames
(DMC-FX1)
2 frames/
second
max.
5 frames
max.
7 frames
(DMC-FX5)/
8 frames
(DMC-FX1)
H
L
FX5_FX1-GN.book 42 ページ ２００３年１２月１７日 水曜日 午前９時２０分