Filter
Top Products
Recording pictures (advanced)
58
Finely Adjusting the White Balance
If you cannot acquire the desirable hue with white balance because of too many
different light sources, etc., adjust the fine white balance as follows.
Preparation
• Set the mode dial except for [ ]/[ ]/[ ]. (P27)
• Set the white balance to [ ]/[ ]/[ ]/[ ]. (P56)
1 Press 3 until [ WB ADJUST.]
appears.
2 Adjust the white balance.
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
• Close the function by pressing 4
after finishing the adjustment.
¬
Suggestions/Tips
¬
• The white balance icon turns red or
blue.
• You can set the value independently
for each of the modes in white
balance.
• When you set the white balance using
the White set [ ], the adjustment
level is set to “0”.
• The adjusted picture will be close,
though may not be identical to the
actual picture.
RED
BL
UE
WB AD
JUS
T
.
EXIT
S
ELE
CT
SET
R
E
V
I
E
W
WB
3 times
RED
BL
UE
WB AD
JUS
T
.
EXIT
S
ELE
CT
SET
R
E
V
I
E
W
WB
FX5_FX1-GN.book 58 ページ ２００３年１２月１７日 水曜日 午前９時２０分