Filter
Top Products
Playback (advanced)
96
¬
Suggestions/Tips
¬
• Refer to P93 carefully when connecting to the OS except for Windows XP and Mac
OS X with setting [USB MODE] to [PTP].
• The flash/access indicator lights during communication.
• When connecting to a PC, we recommend using the AC adaptor as the power
source.
• If the remaining battery power becomes low during communication, the status
indicator blinks and the alarm beeps. In this case, stop the communication. Then
turn the camera off and charge the battery.
• It may take time to display the communication screen depending on the PC.
• You can only load pictures from the camera and cannot write them on the card or
delete them.
• Use the supplied USB connection cable only.
• When there are 1000 or more pictures on the card, the pictures may not be
imported.
• When the PC recovers from the standby mode while connecting it to a camera
with USB connection cables, they may not properly communicate each other.
FX5_FX1-GN.book 96 ページ ２００３年１２月１７日 水曜日 午前９時２０分