Filter
Top Products
Recording pictures (basic)
38
∫ Shutter speed for each flash mode
¢ The shutter speed changes depending
on the slow shutter setting. (P64)
∫ When using the photo flash
•Do not stare at the photo flash from
close proximity when using the flash.
•If you bring the flash too close to the
subjects, they may appear distorted or
discoloured by its heat and lighting.
•Do not cover the photo flash with your
fingers or any other items.
•When you take a picture beyond the flash
control range, the exposure may not be
adjusted properly and the picture may
become bright or dark.
•When you repeat taking a picture,
recording may be disabled even if the
flash is activated. Take a picture after the
card access lamp disappears.
•When the jitter alert appears, we
recommend using the flash.
•When you set to burst mode or auto
bracket, only 1 picture is recorded for
every flash activated.
•The flash icon turns red when activating
the flash and pressing the shutter button
halfway.
•When the flash is being charged, the flash
icon blinks red, and you cannot take a
picture even when you press the shutter
button fully.
•While the flash is being charged in
economy mode, the LCD monitor is off.
•When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [ ] (Daylight)], but
the white balance may not be properly
adjusted if the photo flash is insufficient.
•When the shutter speed is fast, the flash
effect may not be sufficient.
•To avoid picture noise, we recommend
setting [PICT.ADJ.] to [NATURAL]. (P65)
•Refer to P61 for the ISO sensitivity.
Flash mode Shutter speed (sec.)
: AUTO 1/60–1/2000
: AUTO/Red-eye reduction 1/60–1/2000
:Forced ON
: Forced ON/Red-eye reduction
1/60–1/2000
:Slow sync./
Red-eye reduction
1/8¢–1/2000
: Forced OFF
1/8¢–1/2000
8–1/2000
[In [NIGHT SCENERY] in
scene mode (P51)]
FX2_7-GN.book 38 ページ ２００４年８月２日 月曜日 午後３時４０分