Filter
Top Products
Recording pictures (basic)
41
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1 Press 3 several times until
[ AUTO BRACKET] appears
and then set the compensation
range of the exposure.
•You can select the exposure from
j1EV to i1 EV in steps of 1/3 EV.
•When you do not use auto bracket,
select [OFF].
•When setting the auto bracket, the auto
bracket icon appears on the lower left of
the screen.
•When taking pictures using auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure.
When the exposure is compensated, the
compensated exposure value appears on
the screen.
•When the flash is activated, you can take
only 1 picture.
•When setting auto bracket, you cannot
use the audio recording function on
DMC-FX7.
•When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
•The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
•The setting of auto review function is fixed
to [1SEC.]. (The picture is not enlarged.)
•Auto bracket is cancelled after switching
the camera off.
AUTO BRACKET
SELECT
EXIT
FX2_7-GN.book 41 ページ ２００４年８月２日 月曜日 午後３時４０分