Panasonic DMC-FX48 Digital Camera User Manual


 
109
VQT1X57
Others
If you use the battery charger near a radio, the radio reception may be disturbed.
Keep the charger 1 m (3.28 feet) or more away from radios.
The charger may generate whirring sounds when it is being used. This is not a malfunction.
After use, be sure to disconnect the power supply device from the electrical outlet. (A very
small amount of current is consumed if it is left connected.)
Keep the terminals of the charger and battery clean.
Do not leave the card where the temperature is high, where electromagnetic waves
or static electricity are easily generated or exposed to direct sunlight.
Do not bend or drop the card.
The card may be damaged or the recorded content may be damaged or deleted.
Put the card in the card case or the storage bag after use and when storing or carrying the
card.
Do not allow dirt, dust or water to get into the terminals on the back of the card and do not touch
the terminals with your fingers.
Notice for when transferring to another party, or disposing of the memory card
“Format” or “delete” using the camera or a PC will only modify the file management information,
and it will not erase the data in the memory card completely.
It is recommended to physically destroy the memory card or use the commercially available
computer data deletion software to completely erase the data in the memory card before
transferring to another party or disposing.
Management of data in the memory card is the responsibility of the user.
If a name or birthday is set for [BABY1]/[BABY2]/face recognition function, this personal
information is kept in the camera and included in the recorded image.
Disclaimer
Information including personal information may be altered or vanish due to erroneous
operation, effect of static electricity, accident, malfunction, repair, or other handlings.
Please note in advance that Panasonic is not liable in any way for any direct or indirect damage
from the alteration or vanishing of information or personal information.
When requesting a repair, transferring to another party or disposing
Reset the settings to protect the personal information. (P25)
If there are pictures stored in the built-in memory, copy them into the memory card (P96) before
formatting the built-in memory (P26) as needed.
Remove the memory card from the camera when requesting a repair.
Built-in memory and settings may return to factory default when camera is repaired.
Please contact the dealer where you purchased the camera or your nearest Service Center if
above operations are not possible due to malfunction.
When transferring to another party, or disposing of the memory card, please refer to
“Notice for when transferring to another party, or disposing of the memory card” on
P109.
Charger
Card
About the personal information
DMC-FX48P_PC~VQT1X57_eng.book 109 ページ 2008年12月26日 金曜日 午後6時25分