VQT1X57
34
Basic
Pictures recorded with the camera held vertically are played back vertically (rotated). (Only
when [ROTATE DISP.] (P91) is set to [ON])
•
Pictures may not be displayed vertically if they were taken with the camera aimed up or down.
•Motion pictures taken with the camera held vertically are not displayed vertically.
[REC] mode: ñ·¿n¨
Taking Pictures with the Zoom
You can zoom-in to make people and objects appear closer or zoom-out to record
landscapes in wide angle. To make subjects appear even closer [maximum of 9.8k], do
not set the picture size to the highest setting for each aspect ratio (X/Y/W).
Even higher levels of magnification are possible when [DIGITAL ZOOM] is set to [ON] in
[REC] menu.
∫ Types of zooms
•
When using the zoom function, an estimate of the focus range will appear in conjunction with
the zoom display bar. (Example: 0.5 m (1.64 ft.) –¶)
¢ The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting.
∫ Extended Optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 12M (12.1 million pixels) CCD area
is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect.
Direction detection function
Using the Optical Zoom/Using the Extended Optical Zoom (EZ)/Using
the Digital Zoom
To make subjects appear closer use (Tele)
Rotate the zoom lever towards Tele(T).
To make subjects appear further away use (Wide)
Rotate the zoom lever towards Wide(W).
Feature Optical zoom
Extended Optical zoom
(EZ)
Digital zoom
Maximum
magnification
5k 9.8k
¢
20
k
[including optical zoom 5
k
]
39.1k [including extended
optical zoom 9.8k]
Picture quality
No deterioration No deterioration
The higher the magnification
level, the greater the
deterioration.
Conditions None
[PICTURE SIZE] with
(P67) is selected.
[DIGITALZOOM] (P74) on the
[REC] menu is set to [ON].
Screen
display
A
[ ] is displayed.
B The digital zoom range is
displayed.
T
W
T
W
T
W
T
W
DMC-FX48P_PC~VQT1X57_eng.book 34 ページ 2008年12月26日 金曜日 午後6時25分