Filter
Top Products
71
VQT1X57
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P20.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
Applicable modes:
·
[OFF]/[ON]
Note
• When [ON] is set, [ ] is displayed on the screen.
•Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher
than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
•Compensation effect may not be achieved depending on the conditions.
•[ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] mode menu settings, refer to P20.
Specify a person's face and use the face recognition functions.
Applicable modes:
ñ·¿
[OFF]/[ON]/[SET]
Note
•Refer to P61 for details.
For details on [REC] mode menu settings, refer to P20.
This allows the focusing method that suits the positions and number of the subjects to be
selected.
Applicable modes:
·¿
[I.EXPOSURE]
[FACE RECOG.]
[AF MODE]
[š]: Face detection
The camera automatically detects the person’s face. The focus
and exposure can then be adjusted to fit that face no matter
what portion of the picture it is in. (max. 15 areas)
[ ]: AF Tracking
Focus can be adjusted to a specified subject. Focus will keep
on following the subject even if it moves. (Dynamic tracking)
[]: 11-area-focusing
The camera focuses on any of 11 focus areas. This is effective
when the subject is not in the center of the screen.
[ƒ]: 1-area-focusing
(High speed)
The camera quickly focuses on the subject in the AF area on
the center of the screen.
[Ø]: 1-area-focusing
The camera focuses on the subject in the AF area on the
center of the screen.
[Ù]: Spot-focusing The camera focuses on a limited narrow area in the screen.
AF
DMC-FX48P_PC~VQT1X57_eng.book 71 ページ ２００８年１２月２６日 金曜日 午後６時２５分