Panasonic DMC-FX48 Digital Camera User Manual


 
59
VQT1X57
Advanced (Recording pictures)
[REC] mode: n
Advanced (Recording pictures)
Motion Picture Mode
When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package.
Press
3
/
4
to select [REC QUALITY] and then press
1
.
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [n].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
When the subject is focused, the focus indication
lights.
The focus and zoom are fixed to the setting when
recording starts (the first frame).
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the picture quality
Press [MENU/SET].
C
A B
DMC-FX48P_PC~VQT1X57_eng.book 59 ページ 2008年12月26日 金曜日 午後6時25分