Filter
Top Products
VQT1X57
74
Advanced (Recording pictures)
Note
•
When the Burst mode setting is set to Unlimited
–The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
–You can take pictures until the capacity of the built-in memory or the card is full.
•The focus is fixed when the first picture is taken.
•When the burst speed is set to [˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[ò], they are adjusted each time you take a picture.
•When the self-timer is used, the number of recordable pictures in Burst mode is fixed to 3.
•If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc., where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
•Burst mode is not canceled when the camera is switched off.
•
If you take pictures in Burst mode with the built-in memory, it will take time to write the picture data.
•[Œ] is set for the flash when burst is set.
•Auto bracket is canceled when burst is set.
•Burst cannot be used in [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST],
[FLASH BURST], [STARRYSKY], [PIN HOLE] or [FILM GRAIN] in Scene mode.
For details on [REC] mode menu settings, refer to P20.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
·¿n
[OFF]/[ON]
Note
•Refer to P34 for details.
•If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
•The setting is fixed to [ON] in Macro zoom mode.
For details on [REC] mode menu settings, refer to P20.
Using these modes, the pictures can be made sharper or softer, the colors of the pictures
can be turned into sepia colors or other color effects can be achieved.
Applicable modes:
ñ·n
) [DIGITAL ZOOM]
H [COLOR MODE]
[STANDARD]: This is the standard setting.
[NATURAL]: The picture becomes softer.
[VIVID]: The picture becomes sharper.
[B/W]: The picture becomes black and white.
[SEPIA]: The picture becomes sepia.
[COOL]: The picture becomes bluish.
[WARM]: The picture becomes reddish.
DMC-FX48P_PC~VQT1X57_eng.book 74 ページ ２００８年１２月２６日 金曜日 午後６時２５分