Filter
Top Products
Preparation
16
ª Access to the card
When the card is being accessed, the
card access indication 1 lights.
When the card access indication 1
lights, do not remove the battery, or pull
out the card.
Do not disconnect the DC cable when
using the AC adaptor.
The card and the card contents may be
destroyed and the camera may not
operate normally.
As there is a risk that the data on the
card may be damaged or erased due to
the electrical noise, static electricity or
the defects of camera/card, please back
up your data on your PC using USB
connection. (P84)
ª SD Memory Card (supplied) and
MultiMediaCard (optional)
The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The SD
Memory Card is equipped with a write
protection switch that can inhibit writing
and formatting. (When the switch is
moved towards the [LOCK] side, it is not
possible to write or delete data on the
card and format it. When the switch is
unlocked, these functions become
available.)
SD Memory Card
• RP-SDH512 (512 MB)
• RP-SDH256 (256 MB)
• RP-SD128BJ (128 MB)
• RP-SD064B (64 MB)
• RP-SD032B (32 MB)
• RP-SD016B (16 MB)
• RP-SD008B (8 MB)
MultiMediaCard
• The reading/writing speed
of MultiMediaCards is
slower than SD cards.
When MultiMediaCards
are used, the performance
of certain features may be slightly slower
than advertised.
• After recording motion images using the
MultiMediaCard, the card access
indication may appear for a while, but
this is not a malfunction.
1
600