Filter
Top Products
Others
96
Troubleshooting
1: The power does not turn on.
1-1: Are the battery and the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently charged?
Use a battery that has been
sufficiently charged.
2: As the power is turned on, it
turns off immediately.
2-1: Is the battery charge insufficient to
operate the camera? Charge the
battery or replace it with charged
one.
2-2: Has condensation occurred?
Carrying the digital camera from a
cold place to a warm place could
cause condensation to form inside
the camera. Wait until
condensation disappears.
3: The image cannot be recorded.
3-1: Is the Memory Card inside?
3-2: Is the mode dial correctly set ?
Check it.
3-3: There is no memory capacity left
on the card. Before recording,
delete some images.
4: The image is not displayed on
the LCD monitor.
4: Is the the image displayed on the
Viewfinder? Press the [DISPLAY]
button to switch to LCD monitor
display.
5: The LCD monitor/Viewfinder is
too bright or dark.
5: Adjust the brightness of the LCD
monitor/Viewfinder.
6: Flash does not fire.
6: Is the flash closed? Press the
[ OPEN] button to open the
flash.
7: The display or images on the
LCD monitor/Viewfinder are not
focused.
7: Set the mode dial to the mode
corresponding to the distance to
the subject.
8: The image will not play back.
8-1: Is the Memory Card inside?
8-2: There is no image in the Memory
Card.
8-3: The mode dial is not set to
playback [ ].
9: The image is not displayed on
the television.
9-1: Is the camera correctly connected
with the TV? Check it.
9-2: Set the TV to video input mode.
10: When connecting to a PC,
images cannot be transferred.
10-1: Check that the camera is correctly
connected to the PC.
10-2: Is the camera correctly recognized
by the PC?
11: The clock setting is reset.
11-1: If you do not use the camera for a
long time, the clock setting may be
reset. When the message
[PLEASE SET THE CLOCK]
appears, set the clock again.
11-2: When you take a picture before
setting the clock, [0:00 0. 0. 0]
is recorded.