Filter
Top Products
Preparation
21
Attaching the Strap
1
To remove the cover, gently squeeze
both sides of the cover as shown in
picture 1.
2
Rotate the plastic part of the metal
fitting in the direction of the arrow.
• Please attach the plastic part to the
metal fitting again if it is detached.
3
Pass the metal fitting through the
eyelet of the camera.
4
Rotate the plastic part of the metal
fitting to the opposite direction until
it is locked.
5
Move the cover in the direction of the
arrow, and attach it firmly.
• Be sure to move the cover entirely until
it is attached firmly.
6
Attach the strap to the other side of
the camera in the same way.
1
2
3
4
5