Filter
Top Products
Recording images (basic)
31
Checking the Captured Picture
(Review)
After taking a picture, when auto review (P78)
is set to [1 SEC.]/[3 SEC.], the captured
picture is displayed on the LCD monitor/
Viewfinder for 1 or 3 seconds, but you can
also check the picture by following the
methods shown below.
1
After taking a picture, press the 4/
[REVIEW/SET] button.
• The last captured picture is displayed
for about 5 seconds. If you rotate the
zoom lever towards [ ], the captured
picture is zoomed 4 times (A) and
8 times if you rotate it once again.
You can also change the position with
3/4/2/1.
• You can check the previous or following
picture with 2/1.
ª Erasing the captured picture during
the review
1
Press the [ ] button.
2
When the message [DELETE THIS
PICTURE?] is displayed, press 2/1
to select [YES].
3
Press the
4/
[REVIEW/SET]
button.
• The picture is erased.
• Once erased, pictures cannot be
recovered.
• In motion image mode [ ], review cannot
be used.
1
1,
2
,
3
1
W T
REVIEW1
81
DELETEEXIT
DELETE
4
REVIEW4
DELETE SINGLE
DELETE THIS PICTURE?
YES NO
SET
SELECT
MULTI/ALL
2