Filter
Top Products
Recording pictures (basic)
35
• The focus indication D lights and
then the aperture value E and the
shutter speed F appear.
• When the focus indication D is
blinking, the subject is not focused.
Press the shutter button halfway
and focus on the subject again.
ª Using the remote shutter
The remote shutter works similar to the
shutter button on the camera. You can
avoid the jitter (camera shake) with it
when using a tripod.
The power save cannot be cancelled.
1 Connect the remote shutter to the
[AV OUT/REMOTE] terminal on the
camera firmly.
2 Focus on the subject and take a
picture.
• 1: Press the shutter button
halfway to focus.
• 2: Press the shutter button fully to
take the picture.
ª Taking pictures close to the
subject (AF-Macro)
When adjusting the focus ring to
[AF-Macro], you can take pictures
approaching the lens at a distance up to
30 cm from the subject.
• When setting to [AF-Macro], we
recommend using a tripod.
• The available flash range is about
50 cm to 4.8 m. (When setting to
ISO AUTO) (P45)
ª Power indicator
Lighting:
• When turning the camera on
Blinking:
• When the card door is open
• When the card is not inserted
• When there is no remaining capacity
on the card
• When the card is locked in the
recording mode
• When the remaining battery power is
low (blinking slowly)
2560
19
P
ON
OFF
LC1-GN.book 35 ページ ２００４年１月２９日 木曜日 午前９時１５分