Filter
Top Products
Recording pictures (advanced)
63
Setting the White Balance manually (White set)
Preparation
• Set the operational mode dial except for [ ]. (P29)
1 Select [W.BALANCE] and set to
[].
2 (Only when setting the white
balance again) Press 1.
3 Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white
on the screen and press the
shutter button fully.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
¬
Suggestions/Tips
¬
• When setting the white balance to the
mode except for [AUTO] or
[ ] (monochrome), you can finely
adjust the white balance. (P64)
• The setting of the white balance is
applied to the other recording modes.
• In Motion image mode, the white
balance is fixed to [AUTO].
• When the white balance is set to
[AUTO], the adequate white balance is
automatically set by taking a picture
with the flash, but the white balance
may not be properly adjusted when
the photo flash does not sufficiently
reach to the subject.
2560
REC
1
/
4
SETUP
W.BALANCE
WB ADJUST.
PICT.SIZE
QUALITY
WB
B/W
SELECT SET EXIT
MENU
MENU
REVIEW
REVIEW
B/W
LC1-GN.book 63 ページ ２００４年１月２９日 木曜日 午前９時１５分