Filter
Top Products
Recording pictures (advanced)
68
Setting ISO Sensitivity
The ISO setting sets the cameras sensitivity to light. The ISO setting can be
increased when you need to take pictures in places where a flash may not be
allowed. The overall picture quality will decrease slightly as the ISO setting is
increased.
Preparation
• Set the operational mode dial except for [ ]. (P29)
1 Select [SENSITIVITY] and set the
ISO sensitivity.
• When the ISO sensitivity is set to
[AUTO], it is automatically adjusted
from ISO100 to ISO200 according
to the brightness.
• Close the menu by pressing the
[MENU] button after finishing the
setting.
¬
Suggestions/Tips
¬
• In Motion image mode, ISO sensitivity
is fixed to [AUTO].
• To avoid noises, we recommend
decreasing the ISO sensitivity or
setting each item on [PICT.ADJ.] to
[LOW]. (P72)
ISO sensitivity 100 400
Use in bright places
(E.g. outdoors)
Suitable Not suitable
Use in dark places Not suitable Suitable
Shutter speed Slow Fast
Noises Less Increase
OFF
OFF
100 200 400
AUTO
REC
2
/
4
SETUP
SPOT AF
SENSITIVITY
BURST RATE
AUDIO REC.
EXITSETSELECT
MENU
MENU
REVIEW
REVIEW
LC1-GN.book 68 ページ ２００４年１月２９日 木曜日 午前９時１５分