Filter
Top Products
Preparation
11
Charging the Batteries
1 Insert batteries into the charger.
2 Insert the charger into the electrical
outlet.
• The charge lamp
A lights and charge
starts.
3 Charge is completed when the charge
lamp is no longer illuminated.
• Confirm that batteries are inserted properly.
• Disconnect the charger from the electrical
outlet after the charging is completed.
ª Environment/charge error
• Charge in a place with a surrounding
temperature of 32 - 104 F (0 - 40 oC) (also
temperature of the battery).
• When charging starts, the charge lamp
lights.
If after charging starts the charge lamp
blinks, it indicates a charge error.
In this case, remove the charger from the
electrical outlet, take out batteries, check
whether the surrounding temperature or the
batteries are too hot or cold, and charge
again. An error cannot be cancelled by
turning the power off/on. If after charging
again the charge lamp still blinks, consult
your nearest servicenter.
• Use Panasonic AA Ni-MH (nickel-metal
hydride) Batteries.
KC93-PP.book 11 ページ ２００３年３月１９日 水曜日 午後２時１１分