Filter
Top Products
Technical use
80
Connecting to a PC
[Preparation]
• If your PC uses Microsoft Windows
®
98 or Windows
®
98 Second Edition, a USB
driver must be installed from the CD that is included. If you are using a newer
Microsoft operating system such as Windows
®
Me, Windows
®
2000, or Windows
®
XP (Home Edition/Professional), no USB driver needs to be installed. Your PC
should recognize the camera automatically.
1 Insert the Memory Card into the camera, and turn the power switch to
[ON].
2 Connect the camera to a PC via the supplied USB connection cable 1.
[Windows]
The drive is shown on the [My Computer] folder.
• If it is the first time you are connecting the camera to a PC, the required driver is
installed automatically so that the camera can be recognized by the Windows
Plug and Play, then it is shown on the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
• The flash/access indicator lights during access.
• When the battery power is lost during access, the data may be destroyed. The
battery indicator does not appear. When connecting to a PC, use new batteries or
the AC adaptor 2 (optional, DMW-AC1).
• When connecting to a PC, pictures and sounds are not output from the A/V OUT
socket.
• For further information (software installation), read the operating instructions for
PC connection.
A/V OUT
DC IN
USB
1
2
1
2
KC93-PP.book 80 ページ ２００３年３月１９日 水曜日 午後２時１１分