Filter
Top Products
Technical use
79
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied A/V cable 1, it is possible
to view and play back the recorded images.
[Preparation]
• Turn the camera and the television off.
1 Connect the A/V cable 1 to the A/V OUT socket of the camera.
2 Connect the A/V cable to the video in and the audio in sockets of the TV
.
• Yellow: to the video in socket
• White: to the audio in socket
3 Turn the television on and select external input
.
4 Turn the camera on and then set the mode dial to playback [ ]
.
• The image is displayed on the television.
ª Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on a TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
NTSC.
• When connecting to a TV, use new batteries or the AC adaptor (optional,
DMW-AC1).
• Do not use any other cables except the supplied one.
• The A/V cable cannot be connected to the “antenna” connection of your television.
Your TV must provide separate audio and video connections for this feature to
operate correctly.
• Read the TV operating instructions too.
A/V OUT
DC IN
USB
1
2
KC93-PP.book 79 ページ ２００３年３月１９日 水曜日 午後２時１１分