Panasonic DMC-LS2 Digital Camera User Manual


 
Preparation
20
VQT0V10
About the menu screen items
There are 3 menu screens (1/3, 2/3 and
3/3).
You can switch menu screens from any
menu item by rotating the zoom lever.
[BATTERY TYPE]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Select the type of battery being used from
the following 2 types.
[ ALKALINE (LR6)/Ni-MH]:
Alkaline batteries or Ni-MH batteries
[ OXYRIDE (ZR6)]:
Oxyride batteries
If the type of battery being used and the
type of battery selected are not the same,
the battery indication will not be displayed
correctly.
The [BATTERY TYPE] setting also affects
simple mode [ ].
[CLOCK SET]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Change date and time. (P18)
[MONITOR]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
Adjust the brightness of the LCD monitor in
7 steps.
The [MONITOR] setting also affects
simple mode [ ].
[AUTO REVIEW]
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. It is
then enlarged 4 times and
appears for about 1 second. This
mode is useful for confirming
focus. Pictures recorded using
auto bracket or burst mode are
not enlarged even if [ZOOM] is
selected.
[OFF]: The recorded picture does not
automatically appear.
The auto review function is not activated
in motion picture mode [ ].
When pictures are recorded in simple
mode [ ], auto bracket (P43) or burst
mode (P45), the auto review function is
activated regardless of the setting on the
auto review function. (The picture is not
enlarged.)
The auto review setting is disabled when
using auto bracket or burst mode and in
motion picture mode [ ].
[POWER SAVE]
(Except for mode)
Press [ ] to display the [SETUP] menu
and select the item to set. (P19)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the
camera is automatically turned off to
save the battery life) if the camera
has not been used for the time
selected on the setting.
[OFF]: Power save mode is not activated.
SETUP
1
/
3
BATTERY TYPE
EXIT
MENU
SELECT
MONITOR
AUTO REVIEW
0
n
OFF
1SEC.
CLOCK SET
POWER SAVE
SETUP
2
/
3
EXIT
MENU
SELECT
NTSC
PC
NO.RESET
RESET
BEEP
VIDEO OUT
USB MODE
SETUP
3
/
3
EXIT
MENU
SELECT
LANGUAGE
AUTO
ENG
SCENE MENU
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
VQT0V10ENG.book 20 ページ 2005年12月27日 火曜日 午後8時34分