Panasonic DMC-LS2 Digital Camera User Manual


 
Menu Settings
74
VQT0V10
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P65)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
If the card has been formatted on a PC or
other equipment, format it on the camera
again.
Use batteries with sufficient power (P13)
or the AC adaptor (DMW-AC6; optional)
when formatting.
Do not turn the camera off during
formatting.
It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
You cannot format an SD Memory Card
when the card’s write protect switch is set
to [LOCK].
If the built-in memory or the card cannot
be formatted, consult your nearest
servicenter.
[FORMAT]
Initializing the built-in memory or a
card
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
NO
SELECT SET
MENU
MENU
SET
YES
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
VQT0V10ENG.book 74 ページ 2005年12月27日 火曜日 午後8時34分