Filter
Top Products
Basic
28
VQT1C39
∫ Other Settings in Simple mode
In simple mode, other settings are fixed as
follows. For more information about each
setting, refer to the page indicated.
• Focus range:
50 cm (1.64 feet) to ¶ (Tele)
5cm (0.16feet) to ¶ (Wide)
• [AUTO REVIEW] (P20):
[1SEC.]
• [POWER SAVE] (P21):
[5MIN.]
• [ECONOMY] (P21):
[OFF]
• Self-timer (P42):
10 seconds
• Optical Image Stabilizer (P65):
[MODE1]
• [W.BALANCE] (P60):
[AWB]
• [SENSITIVITY] (P62):
This setting becomes the same as when
the highest ISO sensitivity is set to
[ISO800] in intelligent ISO sensitivity
mode [ ]. (P44)
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P62):
– [ ENLARGE]:
: (7M)/
–[ 4qk6q/10k15cm]:
: (2.5M EZ)/
–[ E-MAIL]:
: (0.3M EZ)/
• [AF MODE] (P64):
[]
• [AF ASSIST LAMP] (P66):
[ON]
• You cannot use the following functions in
simple mode.
– [GUIDE LINE]
– High angle mode
– Exposure compensation
– White balance fine adjustment
–[BURST]
– [D.ZOOM]
– [SLOW SHUTTER]
–[COL.MODE]
• You cannot set the following items in
simple mode.
– [TRAVEL DATE]
–[WORLDTIME]
∫ The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark so this function
compensates the backlight by brightening
the whole of the picture.
Press 3.
• When the backlight compensation
function is activated, [ ]
(compensating backlight ON indication
A) appears. Press 3 again to cancel
the backlight compensation function.
• We recommend using the flash when you
use the backlight compensation function.
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/
Red-eye reduction [ ] when the
backlight compensation function is set to
[OFF].
3
BACKLIGHT
3
BACKLIGHT
VQT1C39ENG.book 28 ページ ２００６年１２月２１日 木曜日 午前１０時５７分