Panasonic DMC-LZ7 Digital Camera User Manual


 
Connecting to other equipment
92
VQT1C39
Playing Back Pictures
on a TV Screen
Playing back pictures using the AV
cable and video cable (supplied)
The procedure for DMC-LZ7 is described
below. In the case of DMC-LZ6, connect
the TV and the [V.OUT] terminal on the
camera with the video cable (supplied).
Set the [TV ASPECT]. (P22)
Turn the camera and the TV off.
1 Connect the AV cable A
(supplied) to the [AV OUT] socket
on the camera.
Connect the AV cable with the [ ]
mark facing the [1] mark on the
[AV OUT] socket.
Hold the AV cable at B and insert
straight in or take straight out.
2 Connect the AV cable to the video
input and the audio input sockets
on the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Turn the TV on and select external
input.
4 Turn the camera on.
Depending on the aspect setting, black
bands may be displayed on the top and
bottom or the left and right of the pictures.
Do not use any other AV cables
(DMC-LZ7)/video cables (DMC-LZ6)
except the supplied one.
Audio playback is monaural. (DMC-LZ7)
Read the operating instructions for the TV.
When you play back a picture vertically, it
may be blurry.
You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set
[VIDEO OUT] in the [SETUP] menu. Even
if you set [VIDEO OUT] to [PAL], the
output signal will still be NTSC in the
recording mode.
Playing back pictures on a TV with an
SD Memory Card slot
Still pictures recorded on an SD Memory
Card can be played back on a TV with an
SD Memory Card slot.
Depending on the TV model, pictures may
not be displayed on the full screen.
Motion pictures cannot be played back. To
play back motion pictures, connect the
camera to the TV with the AV cable
(DMC-LZ7)/video cable (DMC-LZ6)
(supplied).
You may not be able to play back
MultiMediaCard.
VQT1C39ENG.book 92 ページ 2006年12月21日 木曜日 午前10時57分