Filter
Top Products
108
1
Copying Stills on DVD-RAM Disc to Card (Copy)
1 Set the power switch to “ ” or “ “.
2 Press the DISC NAVIGATION button.
3 Select the still to be copied.
4 Press the MENU button.
5 Choose “Copy” on the
“Scene” menu screen, and
then press the A button.
6 The “Copy to card” screen
will appear: If you are sure
you want to copy the
selected still, press the A
button.
If you want to change the
still to be copied, you can change it on this screen.
7 The screen for verifying
copy will appear: Choose
“YES”, and then press the
A button.
Choose “NO” to cancel
copy.
After Yes or No setting, the “Copy to card” screen will
be restored.
Repeat steps 6 and 7 to copy other stills to card.
8 Press the g button to quit.
Note:
• No movie can be copied.
• When you can copy stills recorded on DVD-RAM disc to
card, recording quality will automatically be set to “FINE”.
• If you press the MENU button before pressing the A
button in step 6, the submenu screen will appear (P.102).
• See “Category” (P.128) to check the stills recorded on
DVD-RAM disc.
• You can also select multiple scenes (P.98).
• Even if all scenes, including movies, are selected to be
copied, only stills will be copied.
• Data on card cannot be copied to disc.
• Stills recorded on a device other than this DVD Video
Camera may not be copied normally.
Scene
RAM
ENTER RETURN
Delete
Edit
Copy
Select
Detai l
ETC
Copy to card 003/014
RAM
ENTER EX IT
ENTER
Copy PHOTO scenes
to card?
Copy to card
YES NO