Filter
Top Products
162
The DVD-RAM drive of
DVD Video Camera
cannot be opened by PC
Explorer or application.
Error appears. Disc
cannot be ejected.
If DVD-MovieAlbumSE is running, terminate it.
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time.
The file system of this DVD Video Camera is operated on Greenwich
Mean Time (GMT), and time lag information has not been set. With
Windows
®
as of January, 2004, the time stamp of file viewed on
Explorer looks different from the actual recording time. The actual
recording time will appear as date/time indication on playback
screen.
When DVD-
MovieAlbumSE is
started, “Disc in Drive X:
cannot be used”
appears.
A disc other than DVD-RAM is loaded in drive: DVD-MovieAlbumSE
cannot be used for media other than DVD-RAM.
Click the “Preference” button in the dialog box, click the “Device
setting” tab to choose the drive where DVD-RAM disc is loaded in the
“Drive Select” column, and then click “OK”.
141
An image that should
have been recorded
does not appear when
DVD-MovieAlbumSE is
started.
Click the “Preference” button at top right of DVD-MovieAlbumSE
screen, click the “Device Setting” tab to choose the drive where
DVD-RAM disc is loaded in the “Drive Select” column, and then click
“OK”.
“DISC ERROR” appears
when releasing write-
protect.
A disc that was write-protected using the write-protect setting tool
(WPTOOL) equipped with the DVD-RAM driver on the CD-ROM
provided with this DVD Video Camera cannot be released on this
DVD Video Camera as is. Use the write-protect setting tool on PC
to release the write-protect.
No USB HS (high speed)
connection even when
USB2.0 card is used.
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker in
order to operate the USB2.0 card at HS (high speed).
Executing “Export” on
DVD-MovieAlbumSE will
interrupt reading
midway.
Do not choose “Simple Export”: If you do, reading will stop midway.
When executing “Export”
on DVD-MovieAlbumSE,
it takes much time to
read.
• If stills are included in the range of “export”, it may take more time
because data must be re-encoded and read.
• If “Divide by Marker” is not chosen, it may take some time because
data will be read while being re-encoded.
141
Symptom Cause and Correction
Reference
page