Filter
Top Products
97
Playing Back from Disc Navigation Screen
1 Press the DISC NAVIGATION button.
2 Use the joystick to select the desired scene.
The selected scene will be framed: This is called a
“cursor”.
3 Press the A button.
Playback will start from the selected scene.
Note:
Tilting the joystick to left or right will move the cursor to
the preceding or following scene.
Tilting it up or down will move to preceding or following
page.
lWhen playback ends
The DVD Video Camera will
enter playback pause mode at
the last image of last scene.
Pressing the g or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
If playback pause continues for
as long as 5 minutes, the Disc Navigation screen will
automatically be restored.
lPlaying back stills
A still will be displayed for approx. 3 seconds.
When playing back stills on card, playback will stop after
each still playback.
Note:
• Press the A button to temporarily stop playback.
Pressing A again will start from that point.
• If you press the A button after playback of the last
scene on disc finishes, playback will start again from the
beginning of disc.
• Pressing the g button will always restore the Disc
Navigation screen.
• When playing back a still with a large number of pixels on
card, “Playback.” will appear, and it will take some time for
the still to appear.
001/014All Progra
m
s
PLAY
RAM
007/014All Progra
m
s
PLAY
RAM
Up or Down
Left or Right
A
Playback pause