Filter
Top Products
9
Cautions :
1. Keep the DC POWER ON/OFF switch in the OFF posi-
tion until all connections have been properly made.
2. Connect the camera head and camera control unit.
Internal Sync Operation
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video monitor or VCR.
Gen-lock Operation
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video input connector of Special
Effects Generator (SEG), and between the VBS/HD
input connector of the camera control unit.
3. Connect the power cable between the DC 12 V input
terminals and the 12V DC power supply unit (obtained
locally).
Cautions :
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
3. Connect the power cable between the DC 12 V input
terminals and the 12 V DC power supply unit (obtained
locally).
• The maximum cable length between camera control
unit and power supply unit is calculated as follows:
11.5 V DC < V
A - (R x 0.42 x L) < 16 V DC
L : Cable length (meter)
R : Resistance of copper wire (Ω/meter)
V
A : DC output voltage of power supply unit
L standard = V
A - 12 / 0.42 x R (meter)
L minimum = V
A - 16 / 0.42 x R (meter)
L maximum = V
A - 11.5 / 0.42 x R (meter)
Cautions :
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
CONNECTIONS
IN OUT
VIDEO
75Ω Hi-Z
Video
Monitor
IN OUT
VIDEO
75Ω Hi-Z
VCR or
Video Monitor
Coaxial
Cable
VBS/HD VD
OFF
ON
75Ω
S-VIDEO
OUT
1 2VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VBS/HD VD
OFF
ON
75Ω
S-VIDEO
OUT
1 2VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VBS/HD VD
OFF
ON
75Ω
S-VIDEO
OUT
1 2VIDEO
RS-232C
RGB/SYNC
DC 12V IN
CCU
VIDEO Out
75Ω set to ON
VBS/HD In
VIDEO Out
75Ω set to ON
VBS/HD In
VIDEO In
Black Burst
Out
Special Effects Generator
(SEG)