Panasonic HC-V700M Camcorder User Manual


 
110
VQT3Y41
If there is not much remaining capacity in the SD card, a confirmation message asking to
copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot
be restored.
Refer to page 111 for approximate time for copying.
1 Change the mode to .
Use a sufficiently charged battery or the AC adaptor.
2 Select the menu.
When there are relay-recorded scenes in the built-in memory, a message appears on the
screen. Touch [YES] and copy after combining relay-recorded scenes to the SD card.
(l 98)
3 Touch desired items following the screen display.
It will return to the previous step by touching .
(When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
(When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel
the operation.
Up to 99 scenes/still pictures or 99 dates can be set in succession.
If 2 or more SD cards are necessary to copy, change the card following the instructions on
the screen.
4 Touch [EXIT] when the copy complete message is displayed.
The thumbnail view of the copy destination is indicated.
When you stop copying halfway
Touch [CANCEL] while copying.
Copying
: [COPY]
[] When copying from the SD card to the built-in memory
[] When copying from the built-in memory to the SD card
[ CONVERT FORMAT] This will convert the recording format and copy from the
built-in memory to the SD card.
[]This will convert the scene recorded in AVCHD on the built-
in memory to MP4 (640k360/30p) and copy to the SD
card.
[]This will convert the scene recorded in 1080/60p on the
built-in memory to 1080/60i and copy to the SD card.
MENU
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 110 ページ 2011年12月28日 水曜日 午前10時21分