Panasonic HC-V700M Camcorder User Manual


 
21
VQT3Y41
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
Use the supplied AC adaptor. Do not use the AC adaptor of another device.
Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
The battery can also be charged using a battery charger (VW-BC10PP: optional).
The battery will not be charged if the unit is turned on.
It is recommended to charge the battery in a temperature between 10 °C and 30 °C
(50 °F and 86 °F). (The battery temperature should also be the same.)
A DC input terminal
Insert the plugs as far as they will go.
1 Connect the AC cable to the AC adaptor, then the AC outlet.
2 Connect the AC adaptor to the DC input terminal.
Be careful not to pinch the DC input terminal cover.
The status indicator will flash red at an interval of 2 seconds (approximately 1 second on,
1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
To charge by connecting to other device
It is possible to charge by connecting to another device with the USB cable (supplied).
Please refer to page 134.
If the status indicator flashes at a particularly fast or slow rate, refer to page 151.
We recommend using Panasonic batteries. (l 12, 22, 162)
If you use other batteries, we cannot guarantee the quality of this product.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 21 ページ 2011年12月28日 水曜日 午前10時21分