Panasonic HX-A500 Camcorder User Manual


 
- 12 -
Charging and recording time
Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%RH
“h” is an abbreviation for hour, “min” for minute and “s” for second.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
The power lamp flashes (Flashing with approx. 1 second period (off for approx. 0.5 second, on for
approx. 0.5 second)) when the remaining battery time becomes low.
The main unit heats up after use or charging. This is not a malfunction.
For information about charging with a mobile USB charger or an AC adaptor, check the support
site.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This site is English only.)
Charging time Pixels/Frame rate
Maximum continuous
recordable time
Actual recordable
time
4h30min
[3840k2160/30p] 1 h 20 min 40 min
[1920k1080/60p] 1 h 50 min 55 min
[1920k1080/30p] 2 h 10 min 1 h 5 min
[1280k720/60p] 1 h 45 min 55 min
[1280k720/30p] 2 h 5 min
1h5min[848k480/30p] 2h10min
[1920k1080/60fps] 2 h 5 min
[1280k720/120fps] 2 h
1h
[848k480/240fps] 1 h 55 min
The power plug is the disconnecting device. Install this unit so that the power plug can be
unplugged from the socket outlet immediately.
Battery capacity indication
The display changes as the battery capacity reduces. ####
If the battery discharges, then will flash red.