Filter
Top Products
- 17 -
The clock is not set at the time of purchase. Make sure to set the clock.
1 Press the joystick to select the menu. (l 18)
2 Move the joystick right or left to select the date to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick or recording start/stop button to enter the selection.
≥ The year can be set between 2000 and 2039.
3 Move the joystick right or left to select the time to be set, then move the
joystick up or down to select the desired value.
≥ Press the joystick to enter the selection.
4 Press the recording start/stop button to complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. When the battery
of this unit is in a charged state, the built-in clock battery is also charged automatically. If you
leave the battery in this unit in a charged state for approximately 24 hours, the built-in clock
battery stores the clock setting for approximately 4 months.
≥ You can also set the clock by using the “Image App”. Refer to [Help] in the “Image App” menu.
Preparation
Setting date and time
[SETUP] # [CLOCK SET]