Filter
Top Products
Preparation
13
Registering the cordless
camera
Register the cordless camera to a KX-
TG5961AL/KX-TG5971AL/KX-TG5976AL
base unit.
1 Base unit:
Press and hold {INTERCOM} until the
IN USE indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 90
seconds.
2 Cordless camera:
Press PROG. (programme) on the back
side of the cordless camera with a
pointed object such as a pen until a
beep sounds.
LWhen registration is completed
successfully, the cordless camera
beeps and the indicator stops
flashing red but remains lit in yellow-
green (page 8).
Deregistering the cordless
camera
The base unit can cancel the registration
of a registered cordless camera.
Important:
LBefore deregistering, confirm the
cordless camera’s extension number
from the handset (colour display models
only: KX-TGA591AL).
Press {INTERCOM} on the handset to
display its extension.
1 Press and hold {INTERCOM} until the
IN USE indicator flashes.
2 Press and hold the cordless camera's
extension number ({1} – {8}) until a
beep sounds.
Note:
LThe indicator colour on the camera
remains the same.
Base unit
TGA593AL(e).book Page 13 Thursday, April 20, 2006 3:01 PM