Filter
Top Products
Useful Information
19
Mounting the cordless camera on the wall
Standard mounting
Upside down mounting
LThe image may be seen upside down when mounting upside down. To compensate for
this, change the cordless camera setting to display images upside down (page 11).
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 20).
2 Mount the cordless camera (A), then
slide it down (B) and to the right (C)
until it is secure.
LTo aim the camera lens, see page
10.
1 Drive the screws (not included) into the
wall at a recommended height of 1.8 m
or below using the wall mount template
as a guide (page 20).
2 Mount the cordless camera (A), then
slide it down (B) and to the left (C)
until it is secure.
Screws
50.8 mm
(230–240 V AC, 50/60 Hz)
A
B
C
Screws
50.8 mm
(230–240 V AC,
50/60 Hz)
A
B
C
TGA593AL(e).book Page 19 Thursday, April 20, 2006 3:01 PM