Filter
Top Products
Camera Monitoring
16
Paging using the cordless camera call
button
1 Cordless camera:
Press {Call button}.
LThe cordless camera produces a
camera tone and pages the handsets
for 1 minute.
2 Handset:
Press {s} to answer the page.
LYou can monitor the room where the
cordless camera is located.
3 Cordless camera:
When the handset user answers, speak
clearly into the MIC.
4 Handset:
When you finish monitoring, press
{OFF} or place the handset on the base
unit or charger.
Useful settings while camera
monitoring
With a colour display handset (KX-
TGA591AL), you can set the camera
settings while monitoring.
Important:
LEach time you press {OPTION}, the
right soft key switches between
{BRIGHT}, {ZOOM}, and {SENSOR}.
Adjusting the display brightness
There are 6 levels.
1 Start monitoring (page 14).
2 Press {OPTION} repeatedly until
{BRIGHT} is displayed.
3 Press {BRIGHT} repeatedly to adjust
the brightness.
Note:
LWhen you finish monitoring, the setting
is reset to the default.
Selecting image zoom
1 Start monitoring (page 14).
2 Press {OPTION} repeatedly until
{ZOOM} is displayed.
3 Press {ZOOM} to zoom in on the
image.
LTo return to the original view, press
{ZOOM} again.
TGA593AL(e).book Page 16 Thursday, April 20, 2006 3:01 PM