Filter
Top Products
Operating Instructions
30
2.4 Registering the Camera
Before you can view or record images, each camera must be configured on this
software.
• If you change the destination folder from the default folder of this software,
select a folder to save images in advance (see page 23).
• The camera information can be imported and exported (see page 72).
2.4.1 Creating New Camera
1. Select [Camera] [Create New Camera] on the menu bar.
• You can create a camera on the menu displayed by right-clicking on the
camera list (see page 66).
• The create new camera page is displayed.
2. Set the parameters and click [OK].
• The camera preview is displayed on the camera list.
Page Selection Tab
Basic Settings : Displays the setup page for the camera name and IP
address (see page 31).
Image Settings : Displays the setup page for the image size and recording
method (see page 33).
Recording Capacity
Limit
: Displays the setup page for the recording capacity limit
value (see page 34).
Motion Detection : Displays the setup page for the motion detection
recording (see page 35).
Keyword : Displays the setup page for recorded image keyword
(see page 37).