Filter
Top Products
Operating Instructions
89
Network Drive could not be
specified in the Import File.
Specify a local drive.
• Network drives or folders on the network could
not be specified to create an export file.
Specify a local drive.
Network Drive could not be
specified in the Export File.
Specify a local drive.
• Network drives or folders on the network could
not be specified to create an export file.
Specify a local drive.
"Save Destination Free Disk
Space" should be less than the
current free space (XXX MB).
• The disk free capacity set on the preferences
page is larger than the actual capacity.
Set the disk free capacity smaller than the
actual capacity.
"Backup Destination Free Disk
Space" should be less than the
current free space (XXX MB).
• The backup disk free capacity set on the
preferences page is larger than the actual
capacity.
Set the disk free capacity smaller than the
actual capacity.
"XXXX" cannot be accessed.
"XXXX" =
• Save Destination Folder
• Backup Folder
• JPEG Conversion Folder
• Import File
•Export File
• The folder or file cannot be accessed because
the drive cannot be found or the path is not
available.
Properly select a folder of file.
If "Set to Default" is checked,
settings are returned to the state in
"Create New Camera". The default
registration information does not
change.
• You checked [Set to Default] on the create new
camera page, or image, recording capacity
limit or motion detection recording settings on
the camera registration information page.
Follow the instruction message.
If "Set to Default" is checked,
settings are returned to the state in
"Create New Timer". The default
registration information does not
change.
• You checked [Set to Default] on the create new
timer page, or basic setting on the timer
registration information page.
Follow the instruction message.
Message Cause and Remedy