Filter
Top Products
Operating Instructions
49
2.6.2 Using Operation Bar
You can operate camera on the monitoring page. If the feature is not permitted, the
buttons are grayed out.
Preset
Display:
When clicking a preset button, the preset name
appears. Camera operation information is also
displayed.
Refresh: The latest registered buttons are displayed (see
page 52).
Pan/Tilt
Scan
*1
:
*1
If the camera disables their controls, you cannot control their features.
Moves the lens throughout the horizontal ( ) or
vertical ( ) range, and returns to the original
position.
Pan/Tilt/Home
Position*
1
Controls lens direction.
Pan ( : Left, : Right), Tilt ( : Up,
: Down) and Home Position ( : Center)
Preset
Button*
1
:
Applies the camera direction to a preset position.
Zoom*
1
Zooms in or out (see page 50).
Tele , Wide
Focus*
1
Focuses the image (see page 51).
Near , Auto , Far
Brightness*
1
: Changes brightness in nine steps including [STD]
(Standard). Clicking [-] or [+] changes the image
brightness.
Resolution*
1
: Selects [640 x 480], [320 x 240] (default) or [160 x
120] pixels.
Image
Quality*
1
:
Selects the image quality.
• [Favor Clarity] optimizes the image for good
clarity.
• [Standard] keeps the standard quality. (default)
• [Favor Motion] optimizes the image for motion
display.