Filter
Top Products
Operating Instructions
33
Image Settings Page
• Default is displayed when you register a camera.
• If you can change default by checking [Set to Default] and clicking [OK], the
current settings become as a default.
• If you click [Return to Default], the settings return to a default.
Note
If the camera disables setting changes, resolution or image quality settings
may not work properly.
Setting Description
Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
Image Quality Select Favor Clarity, Standard (default) or Favor Motion.
Recorded
Frequency
Set the interval to record images.
[Not Specify
*1
, Specify
*2
or Setting Intervals
*3
]
*1
If you record images as they are set on the camera, set to [Not Specify]. Images are recorded
as the camera sends images through its max. bandwidth.
*2
If you select [Audio and Image], you cannot specify the intervals.
*3
Due to the network environment, you may not monitor the camera at the set intervals or max.
bandwidth.
Recording Setting Select to record the image with audio or only images.