Filter
Top Products
13
Using the Viewfinder/LCD Monitor
ªUsing the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1 Pull out the Viewfinder and tilt it up.
2 Adjust by sliding the Eyepiece Corrector Knob 1.
≥Do not pull hard on the Eyecup.
ªUsing the LCD Monitor
With the LCD Monitor open, you can also record the picture
while watching it.
1 Put the finger on the [OPEN 4] Knob and pull the
LCD Monitor out about 90o in the direction of the
arrow.
≥The Viewfinder goes off.
2 Adjust the LCD Monitor angle according to the
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180o 2 from
the vertical position to the upward direction and a
maximum of 90o
3 to the downward direction. Forcefully
rotating the LCD Monitor beyond these ranges will damage
the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ªAdjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or
[VCR FUNCTIONS] Main-Menu is selected, the following items
are displayed. (l 14)
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and
then turn the [PUSH] Dial to raise or lower the number of vertical
bars in the Bar Indication.
≥A larger number of vertical bars indicates stronger brightness
or colour saturation.
≥For other notes concerning this item, see page 53.
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
23
2
180x 90x
PRESS MENU TO RETURN
LCD/EVF SETUP
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
1
1
2
1
OPEN
1
EG-ENG.book 13 ページ ２００３年１月６日 月曜日 午後３時４３分