Panasonic NV-DS65EG Camcorder User Manual


 
43
Writing Printing Data on a Card
(DPOF Setting)
DPOF Setting Printing data (DPOF Settings), such as the
number of images to be printed, can be written to the Card.
“DPOF” means Digital Print Order Format.
1 Press the [MENU] Button in the card playback
mode.
2 Set [CARD SETUP] >> [DPOF] >> [ON] >>
[VARIABLE] >> [ON].
Pictures recorded on the Card are displayed in
Multi-Picture Mode.
1
To print all pictures one at a time, select [ALL 1]. When all
images are not printed, select [ALL 0].
3 Select a desired picture.
The number of prints set by DPOF 2 is displayed.
4 Turn the [PUSH] Dial and select the number of
pictures to be printed, and press the [PUSH] Dial.
[µ] Indication 3 is displayed in the picture set.
5 Repeat Step 3 and 4 and press the [M-STOP]
Button when the setup is completed.
For other notes concerning this item, see page 49.
~~~~~~~~~~~~~~~~~~~~~
Using the USB Connection Kit
(NV-DS65 only)
Using the USB Connection Kit, you can import still pictures into
your personal computer.
1 Install the supplied USB driver.
2 Select the desired mode of the Movie Camera.
3 Connect the supplied USB Cable 1 to [USB]
Socket.
2
It enters PC connection mode.
The USB Connection Kit can be used with Windows98 Second
Edition/Me/2000/XP.
Use the AC Adaptor as power source for the Movie Camera.
(The Card or its contents may be destroyed if battery power is
lost while transmitting data.)
Mode cannot be changed in PC connection mode by setting
the [VCR/OFF/CAMERA/M-CARD] Switch.
For more details on the operating environment, installation,
connections, and procedures, please refer to USB Connection
Kits operating instructions.
2, 3, 4
1
D-001
PRESS STOP TO EXIT
123
4 5 6
DPOF SETTING
1
M
E
N
U
2
3
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
5
STOP
M-STOP
1
2
1
3
EG-ENG.book 43 ページ 2003年1月6日 月曜日 午後3時43分