Filter
Top Products
Others
105
VQT0V63
Others
Using the MC
Protector/ND Filter
The MC protector (DMW-LMC52; optional)
is a transparent filter which affects neither
the colors nor the amount of light, so it can
always be used to protect the camera’s
lens.
The ND filter (DMW-LND52; optional)
reduces the amount of light to
approximately 1/8th (equal to adjusting the
aperture value 3 increments) without
affecting the color balance.
1 Attach the hood adaptor.
2 Attach the MC protector 1 or the
ND filter 2.
• You cannot attach the MC protector and
the ND filter at the same time.
• If the MC protector/ND filter are tightened
too much, you may not be able to remove
them. Do not tighten them too much.
• Do not hold the MC protector/ND filter too
tightly.
• When taking pictures with the flash using
the MC protector or ND filter, vignetting
effect may occur.
• If the MC protector/ND filter are dropped,
they may be destroyed. Be careful not to
drop them when attaching them to the
camera.
• You can attach the lens hood when the
MC Protector and ND Filter are attached.
• You cannot attach a conversion lens or the
close-up lens to the hood adaptor.
• The lens adaptor (DMW-LA2; optional) is
necessary to attach a conversion lens or
close-up lens.
•MCu“Multi-coated”
NDu“Neutral Density”