Menu Settings
93
VQT0V63
∫ Single setting
1 Press 2 1 to select the picture
and then press 4 to set/cancel.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT] Setting the picture to print
and the number of prints”. (P91 to 92)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures on a card,
they will be deleted if the card is
formatted. (P97)
• Even if you do not protect pictures on an
SD Memory Card, they cannot be deleted
when the card’s write protect switch A is
set to [LOCK].
• The following functions cannot be used
with protected pictures.
–[ROTATE]
– [AUDIO DUB.]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P87)
You can add the audio after taking a
picture.
1 Press 2 1 to select the picture
and then press 4 to start audio
recording.
• The message [OVERWRITE AUDIO
DATA?] screen appears when audio has
already been recorded. Press 3 to
select [YES] and then press [MENU/
SET] to start audio recording. (The
original audio is overwritten.)
• Audio dubbing cannot be used with the
following pictures.
– Motion pictures
– Protected pictures
– Pictures recorded after setting the
quality to [TIFF]
• Audio dubbing may not work properly
on pictures recorded by other
equipment.
2 Press 4 to stop recording.
• The audio recording stops
automatically if 4 is not pressed after
about 10 seconds.
SET The protect icon [ ] appears.
CANCEL The protect icon [ ]
disappears.
SET/CANCEL
PROTECT THIS
SELECT
1/3
100
_
0001
EXIT
MENU
[AUDIO DUB.]
Adding audio after taking pictures
MENU
SET
AUDIO
DUB.
START
SELECT
1/3
100
_
0001
EXIT
MENU
STOP
1/3
100
_
0001
AU
DI
O
DUB.